back
SST71
Inside the float is placed a magnet which drives, without contact, reed contacts located inside a pipe that can itself be the guide of the float. Moving along its guide pipe, the float changes the reed contact status.
FLOAT LEVEL TRANSMITTER
These variations are then acquired by the electronic board and converted into an analog 4-20mA current signal with HART® communication protocol. Thermal drift duly is compensated using the temperature signal generated by a PTC thermistor integrated in the sensor itself.
| Application Cases | |
|---|---|
| Principle | |
| Measuring Range | |
| Process Connection | Threads from 2" G-M or NPT-M Flanges from DN80 or 2” Sanitary connection |
| Process Temperature | |
| Solutions | |
| Type | |
| Brand | |
| Measure |
PDF Manual:No documents found.
